An inspection design method by which mobile robots can inspect large pipe structures has been demonstrated with the successful inspection of multiple defects on a 3-m-long steel pipe using guided acoustic wave sensors.
This approach, developed by a University of Bristol team, was used to review defects including circular holes with different sizes, a crack-like defect, and pits through a designed inspection path to achieve 100% detection coverage for a defined reference defect. Hot Dip Galvanized Steel Pipe
In their study published in NDT and E International, “Pipe inspection using guided acoustic wave sensors integrated with mobile robots,” Jie Zhang, Xudong Niu, and team leaders Anthony J. Croxford and Bruce W. Drinkwater explain how they were able to examine large plate-like structures using a network of independent robots, each carrying sensors capable of both sending and receiving guided acoustic waves, working in pulse-echo mode.
This approach minimizes communication between robots, requires no synchronization, and raises the possibility of on-board processing to lower data transfer costs and hence reduce overall inspection expenses. The inspection was divided into a defect detection and a defect localization stage.
“As the cost of mobile robots has reduced over recent years, it is increasingly possible to deploy multiple robots for a large area inspection,” explained Zhang. “We take the existence of small inspection robots as its starting point and explore how they can be used for generic monitoring of a structure. This requires inspection strategies, methodologies, and assessment procedures that can be integrated with the mobile robots for accurate defect detection and localization that is low cost and efficient.”
The method could be used across other materials, pipe geometries, noise levels, and guided wave modes, allowing the full range of sensor performance parameters, defects sizes and types, and operating modalities to be explored.
The Tube & Pipe Journal became the first magazine dedicated to serving the metal tube and pipe industry in 1990. Today, it remains the only North American publication devoted to this industry, and it has become the most trusted source of information for tube and pipe professionals.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube & Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
Joe Clark, CEO and founder of Architectural Elements, joins The Fabricator Podcast to talk custom fabrication, business...
© 2023 FMA Communications, Inc. All rights reserved.
curtain wall price Not yet registered? Sign up